◆Try the material

Don't take our word for it. Hit it yourself.

A standard test coupon of our foam, in the density you pick, cast on the same machine that makes production parts. Put it on your own rig, next to whatever you use today, and see what comes out. Coupons come as part of starting a project with us, because we don't keep a shelf of them to post out.

What arrives

One coupon, cut to the standard impact-test geometry so it drops straight into your existing setup.

This is the same coupon geometry the comparison impact test on this site simulates, so you can run the test on screen first and then run it for real.

Geometry
101.6 × 101.6 × 25.4 mm, per ASTM D1621 §6.1
Also satisfies
ASTM D3574 Test C sample requirements
Density
Your choice of our three standard grades
Made on
The same automated machine that casts production parts
Ships in
2 business days

Which density do you want to hold?

Tell us on the next screen. Lower density passes less force through and is gentler on what sits behind it; higher density absorbs more energy per unit of volume. If you are not sure, run the comparison test first — it is free and it takes a minute.

100 kg/m³

SFC100

Delicate payloads and modest impact energy — sensors, optics, compute boards.

60 × g peak, estimated, in the helmet-liner case

227.3 kg/m³

SFC227

The general-purpose choice. Repeated knocks, full recovery between them.

69 × g peak, estimated, in the helmet-liner case

355.8 kg/m³

SFC356

Higher-energy impacts where the design has room for a denser pad.

80 × g peak, estimated, in the helmet-liner case

$500 to start a project — credited in full against your production order

Start a project — $500

Why there is no free sample tier.

We don't make foam in sheets, so there is no stock to cut a sample from — every piece that leaves this building was cast for somebody, by somebody. That is also the reason we can tune the density and the shape to your part in the first place. So anything physical starts a project at $500, and all of it is credited against your production order. Everything we can send you as pixels is free, and there is a lot of it.

What engineers do with it

Run it against your incumbent

Same drop, same rig, your current material beside ours. This is the comparison that actually settles the question, because it is run on your equipment to your conditions.

Check it survives your sequence

Hit it more than once. Crushable foams such as EPS are spent after the first serious impact; ours is measured at under 20% loss of load-bearing capacity after seven.

Feel what variable density means

Hold the grades side by side. The point of a tuned material is that the density is a design variable, and that is easier to understand in the hand than on a chart.

Put it in front of your team

A coupon on a desk survives a design review better than a datasheet. Most of the engineers who spec us met the material this way first.

Why a coupon and not a free swatch

A swatch tells you a colour and a texture. A standard test coupon tells you how the material behaves under a load you control, on equipment you trust, measured the way you measure everything else. We charge for it because it is a test specimen cast to a standard, not a giveaway — and because what you pay comes back as credit the moment you start a project.

Not ready to order

Run the test on screen first.

The comparison impact test drops a 0.723 kg weight on this exact coupon geometry, against the comparison material of your choice, and shows both acceleration pulses together. Free, no sign-up.