Start a part

Upload your part. We cast it in our foam.

Upload your CAD, pick a formulation and additive, and see your part in our proprietary polyurea foam. The design review with our engineer is free. From there a $500 engagement covers the simulation, the formulation and the first cast sample of your part, credited in full against production.

  • Minimum order: one part
  • Samples in 2 business days
  • Projects start at $500, credited
  • Reply within 2 business days

$What it costs to start

A project starts at $500, credited in full.

The design review is free and open to anyone — bring a rough load case and we will tell you whether the material fits before you spend anything. Past that point, engineering time goes into your part, and a $500 engagement covers it.

What the $500 covers

  1. 1 Simulation against your load case Your part run through the drops, strikes and vibration it will actually face, with an engineer walking you through the results.
  2. 2 A formulation recommendation Density, additive and loading chosen for your targets, not picked from a shelf.
  3. 3 The first cast sample of your part Made on the same automated machine that runs production, shipped in 2 business days.

The terms, plainly

Your $500 is credited in full against your production order. It is not refundable as cash. If you want to try the material before committing to any of this, order a standard test coupon instead — it costs far less, needs no CAD file, and what you pay for it is credited toward the $500 as well.

Every part is made in our foam

We make custom protective parts from our proprietary polyurea foam. We formulate the foam, mold and cast every part on our own machine, in the USA. Our design tools and FEA sessions are for parts made in our foam.

What we don’t do

  • Make parts in other foams or materials, such as EVA, PE or PU foam
  • Buy, resell or source parts from other suppliers
  • Supply cases, kits or other components around the foam part
  • Design services: you bring the part design, and we tune it for our foam in FEA
1

Upload your part

STEP, STP or STL, up to 20 MB. It previews in 3D in step 2. No CAD yet? Just describe the part.

+ Part name and industry optional
2

Choose a formulation

Pick the base foam and any additives, then see your part in it. We tune density, additive loading and thickness to your targets.

Loading the 3D preview…

Upload a STEP or STL file in step 1 to see your own part.

The preview shows look and texture only. Performance is checked in the simulation once your project starts.

+ Stiffness and the material you are replacing optional
3

Simulation and first sample

The design review is free. A $500 engagement then covers simulating your part and casting the first sample of it.

Our engineer runs your part through the drops, strikes and vibration it will face and walks you through the results. Send your request and we will set it up, or book a time now.

Book a time
+ Add test details optional, rough numbers are fine
4

Order production

Your $500 engagement is credited in full against the production order. Samples ship in 2 business days; production is quoted per order.

An engineer replies within 2 business days.

Your files and requirements are only used to spec, simulate and make your part.