04Coupon bench
Two coupons. One impact each.
Pick a Super Foam grade and a material to put beside it. Both coupons take the same drop, and the result shows where each one wins. Every figure carries a label saying how we got it, because a comparison you cannot check is worth nothing.
◆Coupon test
Pick two. Drop both.
Coupon geometry per ASTM D1621 §6.1 — 101.6 × 101.6 × 25.4 mm, which also satisfies ASTM D3574 Test C. Impact data per ASTM D1596.
Super Foam
Super Foam · 100 kg/m³
Three densities, same coupon. Densities from the SDSU study.
Compare against
Viscoelastic Solid Polymer · 1300 kg/m³
Ten common protective and structural materials.
Now drop the weight on both.
Free. No sign-up needed. Same 0.723 kg weight, same 1 m drop, on each coupon.
Acceleration is written × g, a multiple of standard gravity (g = 9.81 m/s²). Masses are in kg.
Super Foam · SFC100
Comparison material · Sorbothane
Both curves together
EstimateDropped from the same height, SFC100 spreads the impact over 11.7 ms and passes 60 × g through to whatever sits behind it. Sorbothane spreads it over 7.5 ms and passes 95 × g.
Both coupons take the same drop, so both absorb the same impulse. What differs is how long each one takes to do it, and that is what decides how much force reaches the part behind the pad. Neither answer is better in the abstract — they suit different jobs.
Typically chosen for
SFC100
Lowest transmitted force of our three grades
Light protection where the thing behind the pad is delicate and the impact energy is modest.
Typically chosen for
Sorbothane
Excellent vibration damping
Machinery mounts and vibration isolation, where steady-state damping matters more than weight.
How to read these numbers
- Peak acceleration (× g)
- The highest force that reaches whatever sits behind the pad. Lower means a gentler hit for the protected part. Reported as a multiple of standard gravity, g = 9.81 m/s², so 60 × g is sixty times the acceleration of free fall. Written × g throughout so it is never read as grams.
- Impact energy absorbed (%)
- The share of the incoming kinetic energy the material takes out of a single impact, rather than returning it as rebound. Measured on a drop-weight rig. It answers a different question from energy absorbed per unit volume: this is how much of one hit disappears, that is how much a given thickness can take before it bottoms out.
- Pulse duration
- How long the impact lasts. A longer pulse spreads the same energy over more time, which is how peak force comes down.
- Energy absorbed
- How much impact energy the material takes out of the system per unit of volume. Higher means more work done by the pad.
- Height recovery
- How much of its original thickness the coupon gets back afterwards. High recovery means the pad is ready for the next impact; low recovery means it is a single-use part.
- Drop weight (kg)
- The mass released onto the coupon — 0.723 kg here, from 1 m. Masses are given in kilograms on these pages so that g never has to stand for grams.
The numbers, side by side
Estimate| Property | SFC100 | Sorbothane | Evidence |
|---|---|---|---|
| Peak acceleration (× g) | 60.4 | 95.0 | Mixed |
| Impact energy absorbed (%) | 58.0 | — | Measured, one side |
| Energy absorbed (kJ/m³) | — | 40.0 | Estimate, one side |
| Height recovery (%) | 98.0 | 95.0 | Mixed |
| Retention over 7 impacts (%) | — | 90.0 | Estimate, one side |
Where each material sits
EstimateEvery material here trades energy absorbed against force transmitted. Materials to the right take more energy out of the impact; materials lower down pass less force to the part behind them. Different applications want different corners of this chart.
Keep exploring
Super Foam comes in three densities, and each one trades peak force against energy absorbed differently. Run the same comparison against a lighter or denser grade and watch the pulse change shape.
Or send us your part and we will test the real geometry.
Preliminary estimates for screening only. Not a specification, and not a qualification to any standard. Every result needs engineering validation before use in a safety-critical application. Static compression set and sustained-load behavior are deliberately left out: we do not yet have validated data for them.
