03Design tools

Impact test, in your browser.

Look at a cube of our elastomer in 3D, then run drop-weight impacts on it with your own settings. Results are estimates based on peer-reviewed drop tests of our material.

Upload your part: STEP or STLClick or drop a file. STL previews here; up to 20 MB. It is sent only when you submit the form below.

Finish

Your part

Loading the 3D preview…

Drag to rotate · scroll or pinch to zoom.

Run the impact test

◆Impact test

Drop-weight impact test.

A 723 g drop weight on an 18 mm cube of our elastomer, up to seven hits. Change the settings and run it again as often as you like.

Density

Sample densities from the SDSU drop-tower study.

Impact energy

Thickness

12.7 mm (½ in)19.1 mm (¾ in)

Number of hits

Free. No sign-up needed.

Ready to tune the material to your own part?

Request a custom data sheet Talk to an engineer

→After the preview

Next: your FEA session.

Our design team runs your part through our finite element analysis (FEA) simulator under the drops, strikes and vibration it will face in the field, and walks you through the results. Simulation is an inexpensive way to test how the material will behave in environmental conditions it has not been tested in yet, which fits our mission: material and part development that hardware startups can afford.

01Send us the partAttach your file and tell us how the part is used. A STEP file helps if you have one.
02Meet the design teamA short session to agree on loads, environment and the formulation to simulate.
03Review the simulationWe show you how the part performs, and what to change before you order a sample.

Request your FEA session

Send us your part file and we will run a full simulation of your own part.

Name Work email

Company What does the part protect, and what will it face? Part file STEP or STL, up to 20 MB, optional Or book a time now

Your file is used only to prepare your session and is never shared.